3D Technology in Production of Sealed Containers for Chemical Industry Devices
Published 2016-09-30
Keywords
- containers for devices,
- leak tightness,
- 3D-technology,
- chemical industry
Copyright (c) 2023 International Journal of Industrial Engineering and Management
This work is licensed under a Creative Commons Attribution 4.0 International License.
Abstract
Chemical industry today needs new high-tech and cheap sealed containers for devices. The material on the usage of 3D technology in production of device's drum is presented in this article. Samples of device's containers for chemical industry were fabricated by means of 3D printer with different parameters of the 3D printing (thickness of the drum and layer's height). The leak tightness of device's containers was tested under the air pressure. The optimum regimes for 3D printing of sealed containers for devices correspond to minimum possible thickness of sealed containers. The obtained results can be used in low cost production of chemical devices with complex body shape.
Article history: Received (03.12.2015); Revised (17.06.2016); Accepted (30.07.2016)